Washing Machine Shaking or Moving During Spin? How to Stop It

A washing machine that shakes violently on spin usually has an unbalanced load, uneven feet or, on a new or recently moved front loader, transit (shipping) bolts still fitted. Stop the cycle, spread the laundry evenly, rock the machine to check all four feet are firm and adjust them, and remove any transit bolts.

If it still bangs or moves with a balanced load on a level floor, the drum's springs or shock absorbers may be worn and need a technician.

By , maker of TalkFixAI · Published

Load, transit bolts, level, floor

  1. Step 1: Stop the cycle and rebalance the load

    Pause or cancel the cycle and wait for the door to unlock. A single heavy item, such as a bath mat, blanket or pair of jeans, or a small load bunched on one side, throws the drum off balance. Spread the items evenly around the drum, add a few similar items to a very small load, or take some out of an overfull one. Samsung advises not washing items such as floor mats and pillows that do not tumble evenly, unless your manual allows it.

  2. Step 2: Remove the transit bolts (new or moved front loaders)

    Front-loading machines are shipped with bolts at the back that lock the drum in place. If they are left in, the machine shakes violently. Samsung's check: open the door and push the drum. It should move slightly, as if on springs; if it feels rigid, the bolts are probably still fitted. Unplug the machine, unscrew them as your manual shows, fit the plastic caps supplied over the holes, and keep the bolts for any future move.

  3. Step 3: Level the machine

    Press down on each corner in turn and rock the machine side to side and front to back. All four corners should feel solid. If one rocks, unplug the machine, loosen the lock nut on that foot, turn the foot to raise or lower the corner, then tighten the lock nut again so it cannot work loose. A spirit level placed on top helps you get it right.

  4. Step 4: Check the floor and the space around it

    A soft, uneven or springy floor (such as wooden boards, a raised platform or carpet) makes vibration worse. Stand the machine on a firm, flat surface. Leave a small gap so it does not touch walls, cupboards or a dryer: Samsung suggests about 2.5 cm (1 in). Whirlpool suggests an anti-vibration pad if the floor itself is the problem.

  5. Step 5: Run an empty test cycle

    Plug the machine back in and run a short Rinse + Spin with nothing in the drum, then with a normal, mixed load. Some vibration at the start of a spin while the machine senses the load, and at the highest spin speeds, is normal. If heavy shaking or banging continues, try a lower spin speed and book a service visit.

Why a washing machine shakes

During spin the drum turns very fast, so any imbalance in the laundry becomes a strong side-to-side force. Springs and shock absorbers (dampers) hold the drum and soak up that movement, and the feet keep the cabinet steady on the floor. Shaking starts when the load is uneven, a foot is not touching the floor firmly, the drum is locked by transit bolts, or the springs and dampers are worn.

Front loader, top loader or semi-automatic?

  • Front loader: most sensitive to levelling and transit bolts. A loud bang on every spin after years of use can point to worn dampers.
  • Top loader: an unbalanced tub can knock against the cabinet, and many machines stop and show an unbalanced-load error. Rearrange the load and restart.
  • Semi-automatic (common in India): spread clothes evenly in the spin tub, fit the spin tub's safety cover or lid if your model has one, and close the lid fully before spinning.

Shaking, walking or banging?

A machine that slowly walks across the floor usually has a foot that is not touching the floor or a slippery surface. A rhythmic thump with a balanced load points to worn springs, dampers or drum bearings, especially if it is also noisier than it used to be. Those are jobs for a technician.

Parts and tools you may need

Most fixes in this guide need no parts, so do the checks first. If you do need one, match it to your brand and model before you buy.

As an Amazon Associate, AICK Studio earns from qualifying purchases. It does not change the price you pay.

When to stop and call a technician

Call a qualified appliance technician if:

  • it still bangs or moves with transit bolts removed, the feet level and a balanced load,
  • you hear grinding, scraping or a loud rumble that gets worse as the drum speeds up (possible bearing wear),
  • the drum hangs lower on one side or moves loosely when you push it,
  • water leaks from underneath,
  • the machine shows the same unbalanced-load error with every load.

Do not take the cabinet apart or replace springs or dampers yourself unless you are trained.

Is this much vibration normal?

Why does my washing machine shake so much on spin?

The usual causes are an unbalanced load, a machine that is not level, transit bolts left in a new front loader, or a soft or uneven floor. Worn springs or shock absorbers can also cause it on older machines.

How do I know if the transit bolts are still in?

Look for large bolts at the back of a front loader, usually with plastic spacers. Samsung suggests opening the door and pushing the drum: it should move slightly on its springs. If it feels rigid, the bolts are probably still fitted.

How do I level a washing machine?

Rock it at each corner to find the loose foot. Unplug it, loosen the lock nut on that foot, turn the foot to raise or lower the corner until all four are firm, then retighten the lock nut. A spirit level on top helps.

Is some vibration normal for a washing machine?

Yes. A little vibration while the machine senses the load at the start of a cycle and at high spin speeds is normal, and machines on pedestals or soft floors vibrate more. Violent shaking, banging or the machine moving across the floor is not.

Can a shaking washing machine damage itself?

Repeated heavy shaking can wear the springs, shock absorbers and bearings faster and loosen hoses. Fix the cause early, and stop using the machine if it bangs hard or leaks.

Checked against: Samsung US: Samsung washing machine is shaking too much; Whirlpool: Washer is vibrating, walking or moving.

How TalkFixAI talks you through a fix

The screens below illustrate a TalkFixAI conversation that follows the steps in this guide. Your own conversation will depend on what you describe.

  1. Illustrated TalkFixAI chat. You: “My washing machine shakes and bangs during the spin.” TalkFixAI: “Pause the cycle. Is one heavy item, like a bath mat or blanket, bunched on one side?”
    Step 1Washer shaking on spin?Stop it walking across the floor.
  2. Illustrated TalkFixAI chat. You: “I spread the load out. Still shaking.” TalkFixAI: “Unplug it and rock each corner. Does one corner wobble?”
    Step 2Level it. Balance it.Simple fixes, one at a time.
  3. Illustrated TalkFixAI chat. You: “It's a new front loader and it shakes hard.” TalkFixAI: “Push the drum. If it feels rigid, the transit bolts are still in. Remove them as your manual shows.”
    Step 3New machine? Check the bolts.Transit bolts lock the drum in place.

Want TalkFixAI to talk you through this repair hands-free while your hands are busy? Try TalkFixAI, the free repair assistant that answers by voice, even offline.

Other appliance problems